西雙版納Single side butyl sealing tape
西雙版納ACST8523 single-sided PE film butyl waterproof tape
西雙版納Single side butyl sealing tape
Product Details
One: Product Introduction
8523 single-sided PE film butyl waterproof tape is mainly based on PE film, coated with butyl rubber with excellent performance and then covered with single-sided butyl tape composed of release material, which has excellent weather resistance and aging resistance. with excellent water resistance. It has excellent waterproof effect on the adhered surface. It is completely solvent-free, so it does not shrink and emit no toxic fumes. The product is self-adhesive, easy to construct, ready to use, and has a certain adhesive force for some special materials
Two: Product Application
Waterproofing around windows
Waterproof repair and repair of granary gaps
Kitchen and bathroom waterproof
Pipe sealing
Three: General technical indicators
| Item ITEM | Test Condition CONDITION | Technical Standards STANDNRD | |
| Appearance Appearance | 23±2℃ | Easy to open, no foreign matter, voids damage and color diffrence | |
| Dimension Deviation Dimension Deviation (%) | Thickness thickness | 23±2℃ | ±10 |
| width width | ±5 | ||
| length length | No negative deviations allowed No minus deviation | ||
| Hold stickiness Continual force(min) | 23±2℃, 2h | ≥10 | |
| Low temperature flexibility Low temperature flexibility | -40±2℃ | no-crackle on surface | |
| Heat resistance Heat resistance | 90±2℃, 2h | No flow, crack, deformation No flowin & no crack & no deformation | |
| Peel strength Peel strength (N/mm) | Color steel plate Color steel plate, 23±2℃180°Peel, 300mm/min | ≥0.8 | |
| Maintenamce rate of peel strength (%) | Color steel plate Color steel plate, 80°C, 168h, 180°Peel, 300mm/min | ≥80 | |
| Tensile properties Tensile properties | 23±2℃,100mm/min | ≥40N/50mm | |
| Water vapour transmission rate (g/m2 . 24hr/mm) | 0.3MPa, 24h | ≤1.0 | |
Four: How to use
According to different gaps, seam width, choose different specifications of tape.
Degrease and dedust the surface to be bonded to keep it dry and clean. For difficult-to-stick interfaces such as PVC, rubber, cement, and wood, an appropriate primer can be selected.
Unfold the film and lay it on the place to be patched, remove the release paper, and stick the tape to the sealing gap
Roll the surface of the tape by hand or a small pressure roller to make it fully adhered to the surface to be adhered to ensure that the tape and the surface of the object to be adhered are closely combined.
For surface finishing, remove excess with a knife.
Five: Considerations
The water, oil, and dirt on the surface to be pasted must be removed before use. The cement surface must ensure that the surface is free from sand.
This tape is pressure sensitive, the more pressure, the stronger the adhesion. When bonding, please be sure to press to make it close, and no gaps, air bubbles, etc.
Because the product is very sensitive to temperature changes, the use effect is excellent at 25±10℃
Six: Colors and Specifications
Clay color: white, gray, black, other colors can be customized according to customer samples or color cards
Tape width can be customized in the range of 10-1000mm
Seven: Packaging, Storage
Conventional carton packaging: 570*280*200, can be customized according to customer requirements
Keep the original seal and store in a dry, cool and ventilated place, and it can be stored for 12 months below 25℃. Exceed the shelf life and use it after passing the relevant tests.
Eight: Quality Assurance
The company has passed the ISO9001 quality management system, ISO14001 environmental management system assurance, ISO45001 occupational health and safety management system
The company's products are strictly produced in accordance with the industry standards of butyl tape: GB/T2792, GB/T4851, GB/T7125, GB/T12754, , JC/863, JC/T1033, JC/T914.
Passed ROHS, REACH testing, safe and environmentally friendly.
