太原Single side butyl sealing tape
太原ACST8525 Crinkled Aluminum Foil Butyl Waterproof Tape
太原Single side butyl sealing tape
Product Details
One: Product Introduction
8525 Crinkled Aluminum Foil Butyl Waterproof Tape
Corrugated aluminum foil waterproof tape is specially developed and designed for heterosexual waterproof interfaces such as roofing and pipe connections. The elongation rate of the wrinkled aluminum foil tape can reach a maximum of 180%, which can provide an effective waterproof seal for special-shaped overlapping profiles or roof joints. 100% butyl rubber ensures that this product can effectively bond all kinds of roofing profiles: PVC, aluminum, color steel plate, tile, concrete, etc. This product can be completely attached to various entrances and exits such as pipes, chimneys, etc. 360° without cutting.
Two: Product Application
Waterproofing of indoor/outdoor profiled places
Roof waterproofing, and color steel tile wavy waterproofing
Veranda and Iron Boron
Wall lap joint, pipe inlet and outlet, chimney
Waterproof around sunroof
waterproof repair
Three: General technical indicators
| Item ITEM | Test condition CONDITION | Technical Standards STANDNRD | |||
| Appearance Appearance | 23±2℃ | Easy to open, no foreign matter, voids damage and color diffrence | |||
| Dimension Deviation Dimension Deviation (%) | Thickness thickness | 23±2℃ | ±10 | ||
| width width | ±5 | ||||
| length length | No negative deviations allowed No minus deviation | ||||
| Low temperature flexibility Low temperature flexibility | -40±2℃ | no-crackle on surface | |||
| Heat resistance Heat resistance | 90±2℃,2h | No flow, crack, deformation No flowin & no crack & no deformation | |||
| Clarity humidity (g/m224h) | 0.3MPa,24h | ≤3.0 | |||
| Peel strength Peel strength (N/mm) | Waterproofing sheet Waterproofing sheet | 23±2℃ | T Peel 100mm/min | ≥0.8 | |
| Cement mortar board Cement mortar board | 180°Peel, 300mm/min | ≥0.8 | |||
| Color steel plate Color steel plate | 180°Peel, 300mm/min | ≥0.8 | |||
Four: How to use
According to different gaps, seam width, choose different specifications of tape.
Degrease and dedust the surface to be bonded to keep it dry and clean. For difficult-to-stick interfaces such as PVC, rubber, cement, and wood, an appropriate primer can be selected.
Unfold the film and lay it on the place to be patched, remove the release paper, and stick the tape to the sealing gap
Roll the surface of the tape by hand or a small pressure roller to make it fully adhered to the surface to be adhered to ensure that the tape and the surface of the object to be adhered are closely combined.
For surface finishing, remove excess with a knife.
Open the folded aluminum foil tape according to the needs of the opposite sex, so that it can be extended and attached to the substrate
Five: Considerations
The water, oil, and dirt on the surface to be pasted must be removed before use. The cement surface must ensure that the surface is free from sand.
This tape is pressure sensitive, the more pressure, the stronger the adhesion. When bonding, please be sure to press to make it close, and no gaps, air bubbles, etc.
Because the product is very sensitive to temperature changes, the use effect is excellent at 25±10℃
Six: Colors and Specifications
Clay color: gray, other colors can be customized according to customer samples or color cards
Aluminum foil color: metallic color, can be customized according to the color number of the customer's substrate sample
Tape width: 100mm, 200mm, 300mm, 450mm
Seven: Packaging, Storage
Conventional carton packaging: 570*280*200, can be customized according to customer requirements
Keep the original seal and store in a dry, cool and ventilated place, and it can be stored for 12 months below 25℃. Exceed the shelf life and use it after passing the relevant tests.
Eight: Quality Assurance
The company has passed the ISO9001 quality management system, ISO14001 environmental management system assurance, ISO45001 occupational health and safety management system
The company's products are strictly produced in accordance with the industry standards of butyl tape: GB/T2792, GB/T4851, GB/T7125, GB/T12754, , JC/863, JC/T1033, JC/T914.
Passed ROHS, REACH testing, safe and environmentally friendly.
