三亞Single side butyl sealing tape
三亞ACST8520 single-sided aluminum foil (grid) butyl waterproof tape
三亞Single side butyl sealing tape
Product Details
One: Product Introduction
8520 single-sided aluminum foil (grid) butyl waterproof tape is a cost-effective waterproof tape based on grid aluminum foil. The mesh aluminum foil material butyl tape also shows good performance in terms of performance under the premise of high cost performance. Waterproof, cold resistance and other effects. This product is specially developed and designed for roof waterproofing and leak repair, kitchen and bathroom waterproofing, and some household leak-prone products. The tape has excellent weather resistance, aging resistance and excellent waterproofness. It is completely solvent-free, so it will not shrink or emit toxic gas, and it is easy to construct and use. Because the product has excellent aging resistance and weather resistance, it is durable in use.
Two: Product Application
New roof waterproofing treatment
Building roof waterproofing maintenance
Pipe sealing
Kitchen and bathroom waterproof
Mechanical Maintenance Seals
Three: General technical indicators
| Item ITEM | Test condition CONDITION | Technical Standards STANDNRD | |||
| Appearance Appearance | 23±2℃ | Easy to open, no foreign matter, voids damage and color diffrence | |||
| Dimension Deviation Dimension Deviation (%) | Thickness thickness | 23±2℃ | ±10 | ||
| width width | ±5 | ||||
| length length | No negative deviations allowed No minus deviation | ||||
| Low temperature flexibility Low temperature flexibility | -40±2℃ | no-crackle on surface | |||
| Heat resistance Heat resistance | 90±2℃,2h | No flow, crack, deformation No flowin & no crack & no deformation | |||
| Clarity humidity (g/m224h) | 0.3MPa,24h | ≤3.0 | |||
| Peel strength Peel strength (N/mm) | Waterproofing sheet Waterproofing sheet | 23±2℃ | T Peel 100mm/min | ≥0.8 | |
| Cement mortar board Cement mortar board | 180°Peel, 300mm/min | ≥0.8 | |||
| Color steel plate Color steel plate | ≥0.8 | ||||
Four: How to use
According to different gaps, seam width, choose different specifications of tape.
Degrease and dedust the surface to be bonded to keep it dry and clean. For difficult-to-stick interfaces such as PVC, rubber, cement, and wood, an appropriate primer can be selected.
Unfold the film and lay it on the place to be patched, remove the release paper, and stick the tape to the sealing gap
Roll the surface of the tape by hand or a small pressure roller to make it fully adhered to the surface to be adhered to ensure that the tape and the surface of the object to be adhered are closely combined.
For surface finishing, remove excess with a knife.
Five: Considerations
The water, oil, and dirt on the surface to be pasted must be removed before use. The cement surface must ensure that the surface is free from sand.
This tape is pressure sensitive, the more pressure, the stronger the adhesion. When bonding, please be sure to press to make it close, and no gaps, air bubbles, etc.
Because the product is very sensitive to temperature changes, the use effect is excellent at 25±10℃
Six: Colors and Specifications
Clay color: white, gray, black, other colors can be customized according to customer samples or color cards
Tape width can be customized in the range of 10-1000mm
Seven: Packaging, Storage
Conventional carton packaging: 570*280*200, can be customized according to customer requirements
Keep the original seal and store in a dry, cool and ventilated place, and it can be stored for 12 months below 25℃. Exceed the shelf life and use it after passing the relevant tests.
Eight: Quality Assurance
The company has passed the ISO9001 quality management system, ISO14001 environmental management system assurance, ISO45001 occupational health and safety management system
The company's products are strictly produced in accordance with the industry standards of butyl tape: GB/T2792, GB/T4851, GB/T7125, GB/T12754, , JC/863, JC/T1033, JC/T914.
Passed ROHS, REACH testing, safe and environmentally friendly.
