貴陽Double sided butyl waterproof tape
Product Details
A : Product Brief:
8518 Butyl rubber double-sided waterproof tape is a durable waterproof tape with butyl rubber as the main material, supplemented by other additives, and an environmentally friendly non-curing self-adhesive sealing tape processed by a special process. It has excellent resilience, stretchability, aging resistance, peel strength and excellent water resistance, and has the functions of sealing, shock absorption and protection of the adhered surface. It is completely solvent-free, so it does not shrink, does not emit toxic gases, and is easy to construct. It is a rare waterproof material in the construction, machinery, electronics, and power energy industries.
Second : Product application:
Lap joint of steel structure engineering and lap joint of lighting board Mainly used as filling of gaps in steel joints
Building, fire escape caulking and sealing with flame retardant and insulating properties
Automobile damping and shockproof, door and window waterproof sealing, railway locomotive windshield lap seal, excellent followability
Lead-acid battery winding seal insulation + waterproof
Three:General Specifications
| Item ITEM | Test Condition CONDITION | Technical Standards STANDNRD | Reference Standards REF.STANDARD | |
| Appearance Appearance | 5-35℃ | Easy to open, no foreign matter, voids damage and color diffrence | JC/T 942-2004 | |
| Dimension Deviation Dimension Deviation (%) | Thickness thickness | 23±2℃ | ±10 | JC/T 942-2004 |
| width width | ±5 | |||
| length length | No negative deviations allowed No minus deviation | |||
| Density Density(g/cm3) | 23±2℃ | Specified value±0.20g/cm3 | GB/T 533-2008 | |
| Low temperature flexibility Low temperature flexibility | -40±2℃ | no-crackle on surface | JC/T 942-2004 | |
| Heat resistance Heat resistance | 120±2℃,2h | No flow, crack, deformation No flowin & no crack & no deformation | JC/T 942-2004 | |
| Clarity humidity Clarity humidity (g/m224h) | 0.3MPa,24h | ≤3.0/2.24h | GB/T3282.10-2007 | |
| Tensile strength Tensile strength (KPa) | Anodized aluminum panel Anodized aluminum panel | 23±2℃ 25×25mm 50mm/min | ≥80Kpa | JC/T 547-2005 |
| Shearing strength Shearing strength（N/mm） | Waterproofing sheet Waterproofing sheet | 23±2℃ 250mm/min | ≥2.0 | JC/T 942-2004 |
| Peel strength Peel strength（N/mm） | Stainless steel plate Stainless plate | 23±2℃ 180°Peel 300mm/min | ≥0.6N/mm | JC/T 942-2004 |
Four: How to use
1. According to different gaps and seam widths, choose different specifications of tape; the thickness can be from 0.5-25mm, and the width can be from 3-500mm.
2. The surface to be bonded should be treated with water, oil and dust removal to keep it dry and clean. For difficult-to-stick interfaces such as PVC, rubber, cement, and wood, an appropriate primer can be selected.
3. Open the film and stick it to the required sealing position. After removing the release paper, it needs to be quickly overlapped to avoid dust and other debris affecting the bonding effect of the butyl rubber;
4. Roll the lap joint by hand or a small pressure roller to ensure that the adhesive tape and the surface of the adherend are tightly combined;
5. For surface finishing, use a knife to trim off the excess.
Five: Considerations
1. Before use, the water, oil and dirt on the surface of the pasted surface must be cleaned and dry, and the cement surface must ensure that the surface is free from sand;
2. This tape is pressure-sensitive, the stronger the pressure, the stronger the adhesive force. When pasting, please be sure to press the paste to make it close, and there should be no gaps, air bubbles, etc.;
3. Because the product is very sensitive to temperature changes, the initial adhesion of the surface will also change from low to high viscosity during the process of ambient temperature from low to high, and the hardness of the tape will also become soft, please use it reasonably. Our company has winter formula and summer formula for customers to choose.
4. Double-sided butyl adhesive cannot be exposed, and ultraviolet rays will accelerate the degradation and aging of the exposed part.
5. Store away from oily substances, such as solvent-based sealants, paints.
6. Keep the original sealed state and store it in a dry, cool and ventilated place, and it can be stored for 12 months below 25°C. If it exceeds the shelf life, it will be used after passing the relevant testing.
Six: Colors and Specifications
1. Conventional: gray, white, other colors can be customized according to customer samples or color cards, generally use RAL color cards.
2. According to the initial adhesion, density and tensile strength of butyl tape, it is divided into 17, 24, 38, 58 and other models for customers to choose.
Seven: Packaging and Storage
Conventional carton packaging: 570×280×200mm, can be customized according to customer requirements;
Eight: Quality Assurance
1. The company has passed ISO9001 quality management system, ISO14001 environmental management system assurance, ISO45001 occupational health and safety management system
2. The company's products are strictly produced in accordance with the industry standards of butyl tape: GB/T2792, GB/T4851, GB/T7125, GB/T12754, , JC/863, JC/T942, JC/T1033, JC/T914.
3. The company's products meet the relevant standards of JC/T942, pass ROHS, REACH testing, and are safe and environmentally friendly.
